![]() Neither Auto Parts Distributors Pty (Ltd) nor any of the AutoZone outlets will be held liable for any damage or injury whatsoever resulting from the use of the information contained in this pamphlet. ![]() For more details please consult the relevant workshop manual for your vehicle. INDEMNITY: These hints and tips are for information purposes only. Please note this task is ranked as a 2/10 on the AutoZone Hints and Tips Difficulty Rating. While the engine is running, turn off the power switch (if equipped) and carefully disconnect the cables from the battery posts (first the black clamp, followed by the red). These additional battery solutions are available at your nearest AutoZone store – Like the NOCO Genius Boost Pro GB150, this jump starter is a bit costly, but the price is reasonable if you need both a jump starter and a compressor and dont mind the extra bulk. Tip – you can have your battery tested for FREE at any AutoZone outlet, there is also a full range of various batteries for all vehicles including add on components i.e., straps hold downs, terminals and different length battery straps. In the event that your car does not start with ease, it is usually a clear indication that you have a faulty battery. AutoZone outlets can complete these tests for you, find your nearest store here –. It is advisable to then have the battery checked or replaced. ![]() If the problem persists, there may be a fault with your battery internally. If your car does not start on your first attempt, leave it for about 30 seconds and try again. It is recommended that you secure the device and ensure that the connecting cables are out of the way of the engines rotating pulleys and/or fan blades when attempting to start the engine.įor your own safety, it is advisable not to attempt nor activate a portable jump starter before it is connected properly and securely first.Ĭrank your engine until your vehicle starts successfully. When removing the terminals, always remove the black (- negative) first then the red (+ positive). Make sure these are correct and follow the fitting sequence furnished in the instruction manual. If possible, attach the cables directly to the battery itself by securing (first) the red cable to the positive (+) port on the battery and then the black cable to the negative (-) port. Determine which connectors you will need in order to set up your jump starter for your easiest storage location and operating convenience. Some charging packs are equipped with hard-wired cables, whilst others have quick-attach options. The majority of chargers are compatible with common household plugs, as well as the available ports on the side of the device for charging options and scenarios. However, it is recommended that you fully charge your new device prior to using it properly. Typically, most portable jump starters have some charge stored in its internal battery after purchase, this is due to the sequence of quality checks before packaging. Our handy informative guide below outlines how to use a portable jump starter:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |